DEHNCONCEPT 3D SYSTEM PLANNING

DEHNconcept provides a visual representation of the lightning protection measures. It quickly becomes obvious how to integrate these measures into the building architecture.

2D and 3D view drawings as well as mounting details can be generated from the detailed 3D computer model of your buildings at any stage of the planning process.

The benefits are obvious:
A clear visual representation of the protected volumes 360° around the building provides an optimal basis for the installation company which coordinates the mounting procedure. This results in a lower error rate and thus cost optimisation.

3D planning of lightning protection concepts

Planning complex objects and structures by means of a 3D program allows to efficiently design air-termination systems while taking into consideration all parts of the structure. This way, the air-termination systems can be installed more effectively than if the 2D method AutoCAD is used.

Due to the increasing requirements regarding the building architecture, 3D planning is a very good solution for visually representing lightning protection measures. Based on our 3D planning, customers get an idea of how to integrate the lightning protection measures into the building architecture. Another advantage is the clear visualisation of the protected volume of the air-termination systems.

2D drawings and 3D planning

3D planning ensures component-optimised design. No individual views and details of building outlines are drawn, but the building is virtually designed on the computer. In this process, a detailed 3D model is created. 2D drawings can also be generated from this 3D model.

This procedure has numerous benefits:

• All drawings always correspond to the latest version of    the 3D model
• Faults are minimised due to a 360 degree view of the    protected volumes around the building
• The installation company can improve coordination of the   mounting process
• Any number of 2D and 3D view drawings can be    generated from the 3D model
• In addition to the view drawings, any number of   mounting details can be generated